Did This Little Gasket Ruin A NEW MOTOR? Roadside Mechanic Rescue



Get a MUCAR CDE900 PRO here: https://www.amazon.com/dp/B0BZ4L25CZ?maas=maas_adg_C4ACD2F736328C0673992581E5148679_afap_abs&ref_=aa_maas&tag=maas

What sets the CDE900 PRO apart is its ability to serve as a complete OBDII scanner with additional add-on software packages. It can read codes, check the I/M readiness, and access live data, among with additional software for four/full system diagnostics, 28 maintenance services, and active tests.

Donate here.
▬ 𝐕𝐞𝐧𝐦𝐨: @roadsiderescueernest 𝑜𝓇 1(801)822-1477
▬ 𝐏𝐚𝐲𝐏𝐚𝐥: [email protected] 𝑜𝓇 1(801)822-1477
▬ 𝐂𝐚𝐬𝐡𝐚𝐩𝐩: $roadsiderescueernest 𝑜𝓇 1(801)822-1477
↓ become a 𝕮𝖍𝖆𝖓𝖓𝖊𝖑 𝕸𝖊𝖒𝖇𝖊𝖗 ↓
https://www.youtube.com/channel/UCF7h8KmYoTez0f0GbluH6Mw/join

𝕒𝕞𝕒𝕫𝕠𝕟 𝕤𝕥𝕠𝕣𝕖: https://www.amazon.com/shop/roadsiderescue
🅴🅼🅰🅸🅻: [email protected]

#Roadsiderescue #Mobilemechanic #Ernest #HonestErnest #Roadsideservice #mobilemechanicBuisness #Roadsideassistance #Roadsidemechanic #Travelingmechainc

#𝕽𝖔𝖆𝖉𝖘𝖎𝖉𝖊 𝖗𝖊𝖘𝖈𝖚𝖊 #𝕸𝖔𝖇𝖎𝖑𝖊 𝖒𝖊𝖈𝖍𝖆𝖓𝖎𝖈 #єяиєѕт #єaяиєѕт #R̳o̳a̳d̳s̳i̳d̳e̳ ̳s̳e̳r̳v̳i̳c̳e̳ #𝔐𝔬𝔟𝔦𝔩𝔢 𝔪𝔢𝔠𝔥𝔞𝔫𝔦𝔠 𝔟𝔲𝔦𝔰𝔫𝔢𝔰𝔰 #ℛ𝑜𝒶𝒹𝓈𝒾𝒹𝑒 𝒶𝓈𝓈𝒾𝓈𝓉𝒶𝓃𝒸𝑒 #ℝ𝕠𝕒𝕕𝕤𝕚𝕕𝕖 𝕞𝕖𝕔𝕙𝕒𝕟𝕚𝕔 |
roadside rescue, automotive technician, mobile mechanic, roadside mechanic

source

29 thoughts on “Did This Little Gasket Ruin A NEW MOTOR? Roadside Mechanic Rescue”

  1. A smoke machine is best for diagnosing "vacuum leaks", just as a thorough cleaning and UV dye in oil will show an oil leak. Things like brake cleaner and starting fluid are extremely dangerous for intake leak detection; those sprays can spontaneously ignite on a hot exhaust manifold or an arcing spark plug wire, causing damage to plastic fittings, wiring, and plastic vacuum lines found on many engines. A simple spray bottle of water is best for searching with that method. You'll instantly hear the RPM change, safely and cheaply.

    Reply
  2. Ernest has anyone ever told you that break cleaner can and will kill the air ratio and the oxygen sensors in a car.

    That's my biggest pet peeve about seeing people grab a can of break cleaner. I've been a ASC certified master tech for the past 40 plus years and I have never killed a sensor in my life using choke and carb cleaner.

    Reply
  3. That shop who did the job is probably face palming themselves now… Too bad the customer didn't trust them to fix their mistake and hopefully that's the only thing that they did incorrectly during reassembly

    Reply

Leave a Comment