The following are some common methods for patching a cast – iron pot with a hole:
Patching with Aluminum or Iron Sheets
– Materials and Tools: Prepare aluminum or iron sheets of appropriate size, a hammer, nails, and pliers.
– Operation Steps: Cut the aluminum or iron sheet into a shape slightly larger than the hole in the pot. Place it over the hole, and then use a nail to evenly punch holes around the edge. Next, use a hammer and nails to fix the sheet to the pot. Finally, use pliers to bend the nail heads down to ensure they won’t scratch hands.
Patching with Sealant
– Materials and Tools: High – temperature resistant sealant, sandpaper, a scraper.
– Operation Steps: First, use sandpaper to polish the area around the hole until it is clean, rough, and free of oil stains. According to the instructions of the sealant, evenly apply the sealant to the hole and its surroundings. The application should be relatively thick to ensure the hole is filled. After application, let it dry and cure for the specified time.
Patching with Toothpaste Tubes
– Materials and Tools: Collect enough toothpaste tubes, sandpaper, a hammer.
– Operation Steps: Wash and dry the toothpaste tubes, then use a hammer to flatten them. Cut them into small pieces that can cover the hole. Use sandpaper to sand the area of the hole on the pot and the toothpaste tube pieces to make their surfaces rough. Place the toothpaste tube pieces on the hole and gently tap them with a hammer to make them fit tightly to the pot body.
If the hole in the pot is very large or you’re not sure if you can repair it properly, it is recommended to seek the help of professional blacksmiths or repairmen.
source