I swear after buying that Rockshox Domain RC 160mm every fork I see just looks wimpy to me now lol. That Freewheel!!! I gotta know where that was from the most I could find was 32T as the highest tooth count.
Though i wouldnt trust the sag markings on a fork that cheap, on well manufacturered forks; the sag indicator markings make it very easy to get a quick idea of what pressure you need if you have to let the air out of your fork for servicing or putting in / taking out volume spacers. Thanks for the vid as always 🤙
The ZTZ looks sweet!! Love me some Halloween colors! Hope you enjoy the electrolyte drinks, it's all natural. I've been drinking a ton of it for the last month!
Edited to add is Wolfman's back ok after that Wolfman Dyno??
This looks like the bolany 32mm stanchion fork I got off from Temu for 89! That fork was light! That dial did loosen up after a couple hundred miles. I have the fork on an old K2 Nomad 3.0 26in bike with the same 26 wheel up front. Eventually I'll get a pair of 27.5 wheels to put a newer front on the old school 26er and mullet it out…and the rear of the Ledge X1 will also be replaced….always on a budget.😊
I looked at those forks, they didnt seem too bad especially for the money, but I found a set of suntour raidons for not much more and got them. Looking forward to the realtime of these, but not the mystery package 😂😂😂😂
Hi Guys. Thanks to you ive started biking again after a 10 year break. Via your channel ive found out you dont have to pay out mega bucks for a good bike. Just purchaced a GT aggressor pro. Keep the great videos coming
I know I’m not first, but I’m here pretty early
That’s the actual axle size not size of the fork! You need some of the axle be long enough to thread into the fork, right?
I swear after buying that Rockshox Domain RC 160mm every fork I see just looks wimpy to me now lol.
That Freewheel!!! I gotta know where that was from the most I could find was 32T as the highest tooth count.
Cool video today! Yes, definitely on the fork stanchion!! That will get you a true angle measurement. RTR next!
15×145 the 145mm is the total length of the axle.
Could it look more like a Fox fork?
Though i wouldnt trust the sag markings on a fork that cheap, on well manufacturered forks; the sag indicator markings make it very easy to get a quick idea of what pressure you need if you have to let the air out of your fork for servicing or putting in / taking out volume spacers. Thanks for the vid as always 🤙
Sag indicator lines aid in setting sag. Not a must, but helpful…. 'Compression ring' is actually a travel indicator! Still love you guys!
A Rockshox Maxle for a 110×15 boost fork has the following written on it:
L:148 mm
So about point 3 of a stone good to know 😂😜 thanks for the shout out😊
The ZTZ looks sweet!! Love me some Halloween colors! Hope you enjoy the electrolyte drinks, it's all natural. I've been drinking a ton of it for the last month!
Edited to add is Wolfman's back ok after that Wolfman Dyno??
This looks like the bolany 32mm stanchion fork I got off from Temu for 89! That fork was light! That dial did loosen up after a couple hundred miles. I have the fork on an old K2 Nomad 3.0 26in bike with the same 26 wheel up front. Eventually I'll get a pair of 27.5 wheels to put a newer front on the old school 26er and mullet it out…and the rear of the Ledge X1 will also be replaced….always on a budget.😊
Berm Peak has one of those KLEIN angle tools. He uses it in his "Could You Stop" video that he posted a few days ago.
Can this fork be used with the agressor pro?
Holeyyy been stalking y’all’s page looking for the bucklos for my 06 trek fuel 80 haha
Let's goooo
My favourite series is here
Love the channel
✨✨✨✨✨
I looked at those forks, they didnt seem too bad especially for the money, but I found a set of suntour raidons for not much more and got them. Looking forward to the realtime of these, but not the mystery package 😂😂😂😂
Great to see the compzerker out again 👍🍻😎
pretty much the same with my meroca fork aside from the stickers. Not the best but definitely manageable.
Hi Guys. Thanks to you ive started biking again after a 10 year break. Via your channel ive found out you dont have to pay out mega bucks for a good bike. Just purchaced a GT aggressor pro. Keep the great videos coming
I think the 145mm+ on the thru indicate the length of the thru axle including the screwed part. Not the
It's better without the lever..
Can you guys test suspension forks from Temu? PLZ
You can see how tired and worn out Jeremiah is, yet he puts his best face and carries on. Very professional. Mad respect for you, brother.
I got one of those angle finders dudes! Such a good tool for seeing what your HT angle is at when adding or losing travel.
1/2 ton truck shouldn't tow more than it's GVWR